Dnr3 Setting - Genie ZD2812WL User Manual

BLC SETUP
LEVEL
TOP
BOTTOM
LEFT
RIGHT
Press Set to Return
☞
NOTE
■ Because there can be a difference in the effectiveness of HLC according to the amount
of light area in the screen, optimize the installation angle for the best HLC performance.
■ When dark, the HLC is only activated when a bright light exceeding a specific size in
NIGHT ONLY mode.
■ The HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
■ BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.

DNR3 Setting

●
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'DNR3' by using the
Function Setup switch so that the arrow indicates 'DNR3'.
2. Select a desired mode using the Function Setup switch.
◆ OFF : Deactivates DNR3. Noise is not reduced.
◆ ON : Activates DNR3 so that noise is reduced.
LOW
38
109
54
121
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSNR OFF
5.BACKLIGHT OFF
6.DNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
9.EXIT SAVE
10
HLC SETUP
LEVEL MIDDLE
LIMITS NIGHT ONLY
MASK COLOR BLACK
MASK TONE
TOP
BOTTOM
LEFT
RIGHT
Press Set to Return
1
5
120
5
172