Step 4, Prepare The Hood - GE Monogram ZV900 Installation Instructions Manual

Installation Instructions
INSTALLATION-VENTED T OTHEOUTSIDE
I_ PREPARE THE HOOD
• Placethe hood on a padded surface.
• Position the motor housing at the back of the hood.
Electrical connectors should face the front, with
rear mounting hooks at the back.
• Slip the bottom flange of the motor housing into
the side slots at the top rear opening.
• Carefully lay the hood on its back.
• Fasten the hood to the motor housing from the
bottom, using 6 screws.
Front side
\
Rear view
Engage flange on motor
housing into slots
Rear
mounting
hooks
• Join two cable connectors at the front of the hood.
Control
Panel
11