Table of Contents
Advertisement
S13
Call Waiting time
Value
Unit
0
sec.
0-255
1 sec.
Default=30
S25
DTR control
Value
Unit
0-255
sec/100
Default =5
S26
RTS/CTS (C105/C106) delay
Value
Unit
0-255
10 msec. In syncronous mode, defines the RTS/CTS delay (refer also &R command).
Default =1
S31 V25bis command mode selector
Bit-mapped register.
Select either the AT command mode or of the supported V25bis command modes.
All bits
= 0 AT command mode
Bit 1-0
= 00 V25bis Async
= 01 Non available
= 10 Non available
= 11 Non available
Bit 7
= 0 V25bis disabled
= 1 V25bis enabled
Default=0
S34
Pointer for Autologon and Call-Back services
Establishes selection of the memory location the modem uses to initiate Autologon or Call-
Back procedure.
0 - 19
phonebook location for Autologon or Call-Back procedure.
20
phonebook scroll
255
function disable
Default =255
S37
DCE speed
Select the speed connection thruogh the selected V.110 rate adaption protocol (see ATN
command).
0, 255
Last AT command speed
4
= 600 bps
5
= 1200 bps
Function
Call Waiting time disable
Defines the duration of buzzer/TEST led flash when arrives a new call.
Function
Sets the length of time that the modem will ignore DTR for before hanging up.
Function
3.19
Description
Type:Storable
Type:Storable
Type:Storable
Type: Non-storable
Type: Storable
Advertisement
Table of Contents
