Pre-Test Checklist; Operation Checklist - GE CP350 Installation Instructions Manual

Installation Instructions
CHECKLISTS
[]
PRE-TEST CHECKLIST
Remove oil protective film, if present, rand tony
stickers.
Check to be sure thot oll wiring is secure ond
not pinched or in contoct with moving ports.
Check level of oppliunce.
Check thot the cooktop is properly grounded.
OPERATION CHECKLIST
Remove oll items from the top of the cooktop
surfmce.
Turn on the power to the cooktop.(Refer to
your Owner's Monuol.) Verify thot oll surfoce
burners operote properly.
Check thot the circuit breoker is not tripped
nor the house fuse blown.
Check thot conduit is securely connected to
the junction box.
See Owner's Monuol for troubleshooting list.
NOTE TO ELECTRICIAN:
The power leads supplied with this appliance (]re
UL recognized for connections to larger gauge
household wiring. The insulation of these leads
is rated at temperatures much higher than
the temperature rating of household wiring.
The current carrying capacity of a conductor
is governed by the wire gauge and also the
temperature rating of the insulation around the
wire.
NOTE: ALUMINUM WIRING
• WARNING:
IMPROPER CONNECTION OF ALUMINUM
HOUSE WIRING TO THE COPPER LEADS CAN
RESULT IN A SERIOUS PROBLEM.
• Splice copper wires to aluminum wiring
using special connectors designed and UL
approved for joining copper to aluminum
and follow the manufacturer's recommended
connector procedure closely.
NOTE: Wire used, Iocetion end enclosure of
splices, etc., must conform to good wiring
prectice end Iocel codes.