Preparing The Opening - GE JGP628 Installation Instructions Manual

Instollotion Instructions
PREPARING THE OPENING
MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE
DIMENSIONS
13" MAX. Depth of unprotected
overhead cabinets
\\
6" MIN. clearance from
cutout to side wall on the
right of the unit
30" MIN. clearance from countertop
to unprotected overhead surface
18" MIN. height
from countertop to
nearest cabinet on
either side of unit
3-3/4" MIN. clearance from
cutout to side wall on the
left of the unit
NOTE:All gas cooktop models require 7/16"
free area below cooktop height to combustible
material.
I_l OVERALL COOKTOP DIMENSIONS
21" (21-1/4" IVlax.for
CUTOUT DIMENSIONS OF
COUNTERTOP
To ensure accuracy, it is best to make
a template when cutting the opening
in the counter.
_-1/8 _"width cut
length _ 16-15/16"
2-1/4" Min. B of cut cutout and the wail
behind the cooktop
2-1/2" Min. from
front edge of cutout
and front edge of
countertop
RECOMMENDED GAS SUPPLY
LOCATION FROM BACKWALL
Recommended
gas supply
location
l" Min. From Backwall
From Cutout
Center Line
F51 MAKE SURE WALL COVERINGS,
COUNTERTOP AND CABINETS
AROUND COOKTOP CAN
WITHSTAND HEAT {UP TO 200°F)
GENERATED BY COOKTOP
Wall covering,
cabinets and
countertop must
withstand heat
up to 200°F