GE GLDT696T00SS Installation Instructions Manual page 7

Installation Instructions
STEP 6 - POSITION WATER LINE AND
HOUSE WIRING
.Position w(]ter supply line (]nd house wiring on the
floor of the opening to (]void interference with b(]se
of dishw(]sher (]nd components under dishw(]sher.
Line Wiring
Figure 12
STEP 7 - INSERT DRAIN HOSE THROUGH
CABINET
.Upright the dishw(]sher (]nd position in front of the
opening. Insert dr(]in hose into c(]binet w(]ll hole.
If (] power cord is used, guide the end through (]
sep(]r(]te hole.
H(]ximum
Dr(]in Hose
th 10'
Insul(]t
Bl(]nket
Dr(]in
Hose
House
Wiring
Power Cord
(If Used)
Figure 13
TIP: Position w(]ter line (]nd house wiring on the floor
to (]void interference with b(]se of dishw(]sher.
STEP 8 - SLIDE DISHWASHER PARTIALLY
INTO CABINET
DO NOT PUSHAGAINST FRONT PANELWITH KNEES.
DAMAGE WILL OCCUR.
. Side dishw(]sher into the opening (] few inches (]t (] time.
_Do Not Push Ag(]inst
Front Door P(]nel With
Knee. D(]m(]ge to The
Door P(]nel Will Occur.
Figure 14
.As you proceed, pull the dr(]in hose through the
opening under the sink. Stop pushing when the dishw(]sher
is (] few inches forw(]rd of (]dj(]cent c(]binetry.
.H(]ke sure dr(]in hose is not kinked under the dishw(]sher
(]nd there is no interference with the w(]ter
line (]nd wiring or (]ny other component.