Advertisement
Most video/audio
connections
between components
canbemade w ith shielded video a nd audio cables thathave
phono c onnectors.
For b est p erformance,
video c ables s hould u se 75-Ohm c oaxial shielded wire. Cables can be
purchased
from most s tores thatsell a udio/video
products. Below areillustrations
and names ofcommon
connectors.
Before p urchasing
any cables, besure oftheoutput and input c onnector
types required bythe
various components
and thelength o feach cable.
300-Ohm
Twin
Lead
Connector
This outdoor
antenna
cable must be connected
to an
antenna
adapter
(300-Ohm
to 75-Ohm).
Phono
Connector
Used on all standard
video and audio cables which
connect
to inputs and outputs
located
on the
television's
rear jack panel and side control
panel.
"F" Type
75-Ohm
Coaxial
Antenna
Connector
For connecting
RF signals (antenna
or cable TV) to the
antenna
jack on the television.
S-Video
(Super
Video)
Connector
This connector
is used on camcorders,
VCRs and laser-
disc players with an S-Video feature
in place of the
standard
video cable to produce
a high quality
picture.
Optical
Cable
This cable is used to connect
to an audio amplifier
with
an Optical Audio
In jack. Use this cable for the best
sound
quality.
®
HDMI Cable
This cable is used to connect your external devices
such as Set-Top-Boxes or DVD players equipped with
an HDMI output connection to the TV's HDMI input.
!
Stereo
Cable
(3.8mm
plug to 3.5mm
plug)
Used to connect
equipment
with mini stereo audio jack
to the left and right
audio inputs on the rear and side
panels.
_=
©
3 atom
2
STEREO
ROA TYPE
MINI PLUG
PLUGS
USB Cable
This cable is used to connect
your digital camera
to the
Photo Input in the side of the Plasma television.
IR Mouse
Cable/G-LINK
Cable
(Provided)
Connect
the IR Mouse to the IR Blaster output
of your
Plasma Television
when A/V Network
is used.
You
must place the IR Mouse
in front of the corresponding
IR window
of your cable box and VCR. This
connection
allows your TV, and the TV Guide On
Screen
TM
system,
to control
your cable box and/or
VCR.
Power
Swivel
Cable
(Provided
with
42"
models
only)
This cable is used to connect
the swivel stand to the
rear panel of the Plasma Television.
IEEE1394
Cable
This cable is used to connect
your digital television
to
external
digital
devices.This
cable will carry both the
video and audio information.
Sub-Woofer
Cable
Used to connect the Sub-Woofer Out to the Sub-
Woofer Input of an audio amplifeier (not included).
Advertisement
