The List Of Manager's Custom Mode - Vision Fitness T60 Owner's Manual

T R E A D M I L L T 6 0

THE LIST OF MANAGER's CUSTOM MODE

CUSTOM
DEFAULT MINIMUM MAXIMUM
SETTING
P0 MAXIMUM 99 10 99
TIME
P1 DEFAULT 20 10 99
TIME
P2 DEFAULT 1 1 10
LEVEL
P3 DEFAULT 68 kg / 34 kg / 159 kg /
150 lbs 350 lbs
WEIGHT 75 lbs
P4 DEFAULT 30 10 99
AGE
P5 MAXIMUM 20 kph / 6.4kph / 20 kph /
SPEED 12 mph 4mph 12 mph
P6
MAXIMUM 15 4 15
INCLINE
P7
ACCUMU- N/A 0 104,000
km /
LATED
65,000
DISTANCE
mile
P8 ACCUMU- N/A 0 65,000
hrs
LATED
TIME
P9 START 0.8 kph / 0.8 kph / 3 kph /
0.5 mph 0.5 mph 1.8 mph
SPEED
UNIT STEP DESCRIPTION
minute 1 This option enables fitness club managers
to set the program maximum workout
duration limits during peak and non-peak
hours of club traffic. Active variable
displayed in the TIME display after change.
minute 1 This option controls the default program
time.
n/a 1 This option controls the default program
level.
kg / lbs 1 This option controls the default weight
used in the calorie calculations. Sets to
default unit change (kilograms or pounds).
Displayed in native units.
age 1 This option controls the default users age
used in the target heart rate calculations.
kph / Controls the maximum speed for all
1
mph programs. Displayed in native units (miles
per hour or kilometers per hour). Reverts
to default value on unit change.
This option changes the maximum incline
% N/A
grade to 4%, 8%, 12%, 15%
Accumulated distance is not editable, for
km / N/A
mile
display only. Displayed in native units
(miles or kilometers). Holding the INCLINE
and SPEED keys simultaneously to
reset the accumulated distance. After the
treadmill reaches the maximum distance, it
will reset to "0" automatically.
hour N/A Accumulated time is not editable, for
display only. Holding the INCLINE
SPEED keys simultaneously to reset the
accumulated time. After the treadmill
reaches the maximum time, it will reset to
"0" automatically.
kph / 0.1 Controls the starting speed for
mph
programs (minimum speed not affected).
Displayed in native units (miles per hour or
kilometers per hour). Reverts to default
value on unit change.
24
CUSTOM
DEFAULT MINIMUM MAXIMUM
SETTING
P10 60 sec
PAUSE
TIME
P11 LANGUAGE English N/A
P12 UCB N/A
SOFTWARE
VERSION
P13 MCB N/A
SOFTWARE
VERSION
P14 UNITS Metric
P15 MAIN- ON
TENANCE
REMINDER
P15-1 2500mls
MAIN-
TENANCE / 4000
REMINDER kms
DISTANCE
P16 AUTO N/A
CHECK
P17 ERROR N/A
LOG
P18 RESET ALL N/A
and
P19 N/A
MANUFAC-
TURING
all
TEST
UNIT STEP
30 sec 180 sec
second 1 This is the maximum time during which a
workout can remain in pause mode.
N/A N/A N/A The language of the INSTRUCTION CENTER
display.
N/A N/A N/A N/A Software version is not editable, for display
only.
N/A N/A N/A N/A Software version is not editable, for display
only.
Metric English N/A N/A The measurement unit type for weight,
distance, and speed.
This option enables fitness club managers
N/A N/A N/A N/A
to set the maintenance reminder as
ON/OFF.
2500mls 5000mls km/ 10
When the treadmill's accumulated distance
/ 4000 / 8000 miles reaches the certain kilometers or miles, the
maintenance reminder will display in the
kms kms
message center meaning maintenance is
needed.
N/A N/A N/A N/A The function is to calibrate the treadmill's
incline after the completion of the installation.
N/A N/A N/A N/A Error log is not editable, for display only.
Holding the INCLINE
simultaneously to erase the error log.
N/A N/A N/A N/A The function would clear all custom
settings had stored on the unit as a default
value. Holding the INCLINE
keys simultaneously to clear all custom
settings as a default value.
N/A N/A N/A N/A
The function is only for manufacturer use.
25
T R E A D M I L L T 6 0
DESCRIPTION
and SPEED keys
and SPEED