Broan 331H Installation Instructions Manual page 12

13. INSTALLLIGHTBULBS
This hood must use 120 V, 50 W, MR16 with GU10 base or PAR16 with GU10 base, shielded halogen lamps (not included).
(2 required for 30" and 36" hood widths, 3 required for 42" and 48" hood widths).
}ersonal injury, only install shielded halogen lamps. Also, never install a cool beam, a dichro'fc lamp, a
not suitable for use in recessed luminaires or identified for use in enclosed fixtures.
1. Install lamps by placing the bulb leads into their grooves in the socket.
2. Gently push upwards and turn clockwise until secure.
To remove lamps, gently push upwards and turn counterclockwise to disengage
bulb leads from their grooves.
NOTE: If need be, use a rubber dishwashing glove to add grip when removing the
bulb.
2
14. REINSTALLGREASEDRIP RAILAND FILTERS
Remove protective plastic film covering filters before installing them.
Reinstall grease drip rail. The illustration at right shows how to reinsert the
grease drip rail into the range hood.
HD0241
NOTE: Assemble the metal handles to the filters, using no. 8-32 x 1/4" screws
provided, before reinstalling them in the hood.
It is recommended to install side filters first and finish with center one(s).
1. Insert one end of the filter into the upper channel of the hood.
2. Raise the other end toward the inside of hood and insert in the grease
drip rail of the hood.
-12-