Kenmore 630.1395 Installation Manual page 13

STEP10
Attaching the strain relief
Attach the strain relief (not included) ta the strain relief
plate. The two screws on the back of the strain relief shauMd
be positioned as shown to prevent interferences during
assembly. Tighten the strain relief lock nut to prevent the
strain relief from turning.
STEP 11
Electrlcal Connection
Pass wires through strain relief and pMate. Leave 3 to 4
inches of insulated wire extending through the strain relief
plate. Tighten clamp around wires, oriented as shown.
Bending the electrical cable as shown will ease installation
of the strain relief plate.
13