Connect Electric - Bosch HDS7132U-01 Installation Instructions Manual

Freestanding dual fuel range
Hide thumbs Also See for HDS7132U-01:
Table of Contents

Advertisement

Step 6: Installation
=
Three Wire Connection
The Four Wire Connection
is preferred,
but where
local codes and ordinances permit grounding through
neutral and/or conversion to four wire is impractical,
unit may be connected to the power supply via a three
wire connection.
1.
Disconnect electrical power at breaker box.
2.
Remove the terminal block cover to expose the
terminal block (See Figure A).
3.
Remove top nut, star washer, and round washer
from each post.
Note: DO NOT remove last round washer, last nut or
internal wiring leads.
4.
Attach white wire, round washer, star washer and
nut IN THIS ORDER on top of ground strap on
center post.
5.
Attach red wire, round washer, star washer and
nut IN THIS ORDERto left post.
6.
Attach black wire, round washer, star washer and
nut IN THIS ORDER to right post (See Figure B).
Z
Tighten all connections securely and replace
terminal block cover (See Figure C).
8.
Properly secure strain relief (see previous page).
FourWire Connection(Preferred tothreewireconnection).
1.
Disconnect electrical power at breaker box.
2. Remove the terminal block cover to expose the
terminal block (See Figure A).
3.
Remove top nut, star washer, and round washer
from each post.
Note: DO NOT remove last round washer, last nut or
internal wiring leads.
4.
Remove screw from bottom end of ground strap.
5.
Remove ground strap from center post, rotate so
that wide end is at top and attach wide end to
range through hole below junction box. Attach
green wire on top of ground strap. Tighten Screw
(See Figure D).
6.
Attach red wire, round washer, star washer and
nut IN THIS ORDERto left post.
Z
Attach white wire, round washer, star washer and
nut IN THIS ORDERto center post.
8.
Attach black wire, round washer, star washer and
nut IN THIS ORDER to right post (See Figure E).
9.
Tighten all connections securely and replace
terminal block cover,
10. Properly secure strain relief (see previous page).
Note" DO NOT plug in range at this time,
Proceed
to step 7, next page,
Connect Electric
,,,
Our
%,
Figure 5
_r
Figure 7
Red
White
Ground Strap
Black
\,
Figure 8
Black
Ground
White
/
Strap
S
Red
Green Ground Screw
Green Ground Screw
Green
L
Figure 9
'_r
Figure !0
Red
/
Black
White
/
J
English * 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hds7052u-01Hds7022u-01Hds7062u-01Hds series

Table of Contents