Table of Contents
Advertisement
Menu Operations
Function Menu Options Continued
TIMER ON
MODE
ON TIME
Press CH+/CH- to select MODE and VOL+/VOL- to set it OFF/DAILY/ONCE.
Press CH+/CH- to select ON TIME and VOL+ to enter. Press VOL+/VOL- to select
the position you want to change and CH+/CH- to set.
TIMER OFF: Press VOL+ to enter the submenu to set.. Using this function can
turn the TV set automatically into standby status at the preconcerted time. Same
as adjustment of TIMER ON .
SLEEP TIMER: The sleep timer automatically shuts off the TV after a preset time
(from 0 to
120
minutes)
TIME ZONE: This functionallows you to select your local time zone. Broadcasted
time information will correct the clock display for your local time.
DAYLIGHT: DAYLIGHT is automatically set by specially broadcasted signals.
This menu item allows you to disable the automatic setting of daylight. This is
useful if you live in an area or state where daylight is no applied, but you receive
channels from other areas where daylight signals are broadcasted.
9. OSD TIMEOUT: Press to set the time of the OSD displaying on screen.
10. RESET : Press VOL+ to reset some settings to the factory default .
Adjust Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
Note: This menu appears only in PC mode .
2. Press CH+/CH- button to enter the adjust menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved ..
OFF
--:--
AUTO CONFIG
PHASE
CLOCK
H POSITION
V POSITION
ON TIME
--:--
ADJUST
0
0
0
0
Advertisement
Table of Contents
