Table of Contents
Advertisement
Menu Operations
Adjust Menu Options Continued
Functions:
AUTO CONFIG :
parameters .
PHASE :
Removes any horizontal distortion and clears or sharpens the displayed
characters .
CLOCK :
Adjust the TFT-LCD to match the PC input source clock frequency
H POSITION : Picture horizontal position adjust
V POSITION : Picture vertical position adjust .
Channel Menu Options
1. Press MENU and VOL+/VOL- button until the following menu appears on the
screen
Note: This menu appears only in TV mode .
2. Press CH+/CH- button to enter the channel menu and to go up and down to
select the desired option .
3.Press VOL+/VOL- button to increase and decrease the level to adjust the
selected option to your preference .
4.
Repeat step 2 and step 3 until desired settings have been achieved .
Functions:
1. CH NO. : Press VOL+/VOL- to go up and down to set the channel number.
The display will show the current playing channel.
2. NAME: Allows you change the name of the channels in analog signal.
And display the channel name automatically in digital signal.
Automatically adjusts picture location frequency and phase
CHANNEL
CH NO
.
NAME
TUNER
SKIP
AFC
FINE TUNE
AUTO SCAN
11.1
CABLE
OFF
ON
63.25MHZ
Only available in analog signal
Advertisement
Table of Contents
