Print Quality Problems - Kyocera EP 370DN Operation Manual

Print Quality Problems

Printed Results
Completely blank printout
Black or white vertical streaks
Faint or blurred printing
OPERATION GUIDE
The tables and diagrams in the following sections define print quality
problems and the corrective action you can conduct to solve the problems.
Some solutions may require cleaning or replacing parts of the printer.
If the suggested corrective action will not solve the problem, call for
service.
Check the toner container.
Open the top cover and check that the toner container is correctly
installed in the printer. For more information on installing the toner
container, refer to Toner Container Replacement on page 3-3.
Check that the application software is correctly operated.
Check the operation panel for toner.
If the Toner low message is displayed, install a new toner kit. To
replace the toner container, refer to Toner Container
Replacement on page 3-3.
Check the EcoPrint setting.
When this setting is On, switch it to off on the operation panel.
Make sure the paper type setting is correct the paper being used.
Check the operation panel. If the Toner low message is
displayed, install a new toner kit. To replace toner, refer to Toner
Container Replacement on page 3-3.
Corrective Action
Troubleshooting
4-3