Display Duration Of The Photos - Telefunken 11301 User Manual

Fig.10
Press to leave the menu, and then press
5. Display duration of photos
You can adjust the display duration of your slide-shows images with 5 different
possibilities (3s, 5s, 10s, 30s, 60s). The default is 3s.
With the remote control
When the frame is in slide show mode and photos are being displayed, press the remote
control's EXIT button once to leave the slide show, and then press SETUP. The menu is
displayed. Using the remote control's UP/DOWN buttons, highlight the "display time" line,
and then press ENTER. The different durations appear (fig. 10).
Select the desired duration using the UP/DOWN buttons, and then press ENTER to
confirm your choice. Next press EXIT to leave the menu, and then ENTER to launch the
slide show again.
With the frame
When the frame is in slide show mode and photos are being displayed, press
the slide show and then press
to launch the slide-show again.
.
Document non contractuel, soumis à modification en cas
d'erreur typographique – MKG0207
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
21
to leave