Selecting A Fixed Image - Telefunken 11301 User Manual

When the frame is in slide-show mode and photos are being displayed, press
The screen on the left appears (fig. 4). Select the desired slide-show (card or internal
memory) with the
Fig.4
When the frame is in slide-show mode and photos are being displayed, point the remote
control at the frame and then press EXIT once. The frame then displays the image's
thumbnails. Select the desired photo using the remote control's arrow buttons (left, right,
up and down), then press ENTER. The selected image is displayed and doesnot change.
If you press ENTER once more, the slide show begins again.
Fig.5
With the frame
buttons; then press
5.

Selecting a fixed image

With the remote control
twice (fig. 5)
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
14
twice.