Installing The Frame - Telefunken 11301 User Manual

IV.
Your Digicadre's inclination can be adjusted by bringing the adjustable support down.
Choose the inclination that suits you best among the 4 different levels (fig. 1). by pressing
and holding the button located on the support, and pulling the support down. Set the black
mark (white circle in fig. 1) to be facing marks numbered 1 or 2.
To set the frame in the vertical (portrait) position, unscrew the 4 thumb-wheels that are
found at the base, and turn the support set one quarter of a revolution. Screw the thumb-
wheels back on and set the support on the marks numbered 3 or 4.
Fig.1
Plug the end of the mains adaptor into its socket and then connect the other end to the
wall-socket.
INSTALLING DIGICADRE
1. Inclining the frame
2. Electrical connection
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
11 11