Maintain the Océ Prime tool
The Océ Prime tool is an accessory used to establish ink flow when you install
new cartridges and reservoirs. It operates using four (4) AA batteries.
[39] Océ CS 5090 Prime Tool
M
To replace the battery
Turn over the Océ Prime tool and remove the battery access cover located on
1
the bottom.
Note the orientation of the battery pack.
2
Remove old batteries and replace with new batteries.
3
Reinstall the battery access cover.
4
M
To clean the Océ Prime tool
Clean the Océ Prime tool (part that touches the cartridge) with distilled water
1
and a lint-free cloth to remove ink.
Thoroughly wash the ink bottle and allow to air dry.
2
Transport the printer
Before removing your printer from service, do the following preparations:
Remove the ink cartridges and store them in a sealed plastic bag, away from
I
direct light and heat.
Remove the ink reservoirs.
I
Wash out the service station.
I
116
Océ CS 5090 User Manual