Kenmore 721.67600 Installation Instructions Manual page 7

STEP 1: PREPARE THE
ELECTRICAL CONNECTIONS
_k, WARNING _k,
AVOID ELECTRICAL SHOCK! THIS APPLIANCE MUST BE GROUNDED!
1. Locate the grounded electric outlet for this oven in the
cabinet above the oven, as shown in Figure 4 Detail.
NOTE: The outlet should be on a circuit dedicated to the
microwave oven 120volt, 60Hz., AC only, with a
15 or 20ampere fused electrical supply.
IMPORTANT: If you do not have the proper wall outlet, you
MUST have one installed by a qualified
electrician.
2. You will cut the power-supply-cord hole (shown in Figure
4 Detail) later when you prepare the wall and upper
cabinet in Step 4.
NOTE: Do not use an extension cord.
Keep the power cord dry and do not pinch or
crush it.
Upper
Cabinet
-Grounded Outlet
Power-Supply-Cord Hole
Figure 4 Detail
_k, WARNING
Improper grounding could result in
electric shock or other personal injury.
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER
SUPPLY CORD GROUNDING PRONG! This appliance MUST be
grounded!