Kenmore 721.67600 Installation Instructions Manual page 4

YOUR SAFETY FIRST
• MAKE SURE YOU HAVE ENOUGH SPACE AND SUPPORT.
- Mount the oven against a flat, vertical wall, so that it is supported by the wall. The wall should be
constructed of minimum 2" x 4" wood studding and 3/8" thick drywall or plaster/lath.
- ATTACH AT LEAST ONE of the two lag screws supporting the oven to a vertical, 2" x 4" wall stud.
- DO NOT mount the microwave oven to an island or peninsula cabinet.
- BE SURE the upper cabinet and rear wall structures are able to support 150 Ibs., plus the weight of any
items you place inside the oven or upper cabinet.
- Locate the oven away from strong draft areas, such as windows, doors, and strong heating vents.
- BE SURE you have enough space. See Figure 4 below for minimum vertical and horizontal clearance.
WARNING
If you do not mount the oven as instructed,
you risk personal injury and/or property damage.
ii Grounded Plug
_-b i,,,, i (inside upper cabinet)
Power St I ply Cord Hole
)
30"min. c abinet o pening width
30" min. clearance from bottom
of cabinetto cooking surface
or countertop
(Use templates included
with installation
instructions)
[.................................................. .................................................................. ................................................... .....................................
Figure 4
CAUTION
• Before you begin installing the oven, PLACE A
PIECE OF THE CARTON OR OTHER HEAVY
MATERIAL (a blanket) over the countertop or
cooktop to protect it. Do not use a plastic cover.
Failure to protect these surfaces could result in
property damage.