Advertisement
Disposal after spinning
1
Hang up the drain hose.
2
Pull off the power plug and hang up the power cord.
3
Wipe the complete unit with soft cloth twisted dry.
4
Open the inner/outer cover of the spin tub for some time (about one hour),
then close them.
Maintenance
1
Wipe off the water drops on
the surface and inside the
tub with clean soft cloth.
2
Be sure to pull off the power
plug before maintenance.
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance
department or after-sale service department of our company. Do not repair it by yourself.
Phenomena
The machine does not act.
There's abnormal sound
and violent vibration
during spinning
If the cabinet is dirty, wipe it with wet soft cloth
Do not wash it directly by water.
Wipe with neutral detergent if too dirty
Do not wipe with thinner, petrol,
alcohol, etc.
The reason-How to solve
Is there power failure--Please use it when there's power supply.
Is the power plug loose--
Is the machine slanting--Adjust the machine to be even
Is the gland pressed evenly--
Check if the laundry is inclined to one side--Take it
out and replace it evenly.
Check if there are any metal articles in the laundry.
-- take them out.
Check if it is too full with the laundry-- load the laundry
only in the right amount.
Check if there are any articles out of the spinning drum
-- put them into the drum.
Insert the power plug tightly.
Put the gland in properly
Thinner
Petrol
Alcohol
Advertisement
