Assembly - Weslo Pursuit G 3.1 Bike Manual

ASSEMBLY

•• Assembly requires two persons.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
•• To identify small parts, see page 5.
1. Identify the Front Stabilizer (16), which is shorter
than the Rear Stabilizer (not shown).
While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (16) to the
Frame with two M10 x 65mm Bolts (28).
2. Attach the Rear Stabilizer (15) to the Seat Frame
(2) with two M10 x 65mm Bolts (28) and two M10
Locknuts (45).
•• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
15
28
6
16
1
2
45
28