DP PCI-to-PS/2 Quick Installation Guide Introducing the DP PCI-to-PS/2 The DP PCI-to-PS/2 easily adds PS/2 ports to your PCI equipped desktop. Features and Benefits • Provides two PS/2 ports for PS/2 keyboard & mouse connectivity • Keeps your PS/2 keyboard and mouse around longer •...
Layout PS/2 Keyboard connector PS/2 Mouse connector Figure 1: Layout Hardware Installation Note: For low profile systems, replace the currently mounted bracket with the included low profile bracket. General instructions for installing the card are provided below, since the design of computer cases and motherboards vary.
Carefully align the card to the selected PCI slot, push the board down firmly, but gently, until it is well seated. Replace the slot bracket holding screw to secure the card. Connect the PS/2 keyboard and/or mouse to the appropriate PS/2 connector. Replace the computer cover and reconnect the power cord.
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. Step 2: After obtaining an RMA number, ship the product.
Page 8
Fremont, CA 94538-3152, USA Phone: 510-657-8688 DP PCI-to-PS/2 is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Pentium is a registered trademark of Intel Corporation.