Removing A Wheel; Installing A Wheel - Yamaha WOLVERINE YFM45FXX Owner's Manual

3. Insert a new bulb into the socket, push it in,
and then turn it clockwise until it stops.
4. Install the lens by installing the screws.
ECB00700
CAUTION:
Do not overtighten the screws, otherwise the
lens may break.
EBU25650

Removing a wheel

1. Loosen the wheel nuts.
8
1. Wheel nut
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU25700

Installing a wheel

1. Install the wheel and the nuts.
NOTE:
G
The arrow mark
the rotating direction of the wheel.
G Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
1. Arrow mark
8-55
on the tire must point toward