Adjusting A Headlight Beam - Yamaha WOLVERINE YFM45FXX Owner's Manual

1. Do not touch the glass part of the bulb.
ECB00650
CAUTION:
Do not touch the glass part of the headlight
8
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth
moistened with alcohol or thinner.
5. Install the headlight bulb holder by aligning the
projections with the holes in the headlight unit,
pushing it inward, and turning it clockwise until
it stops.
6. Install the headlight bulb holder cover at the
rear of the headlight.
ECB00670
CAUTION:
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seated
properly.
7. Adjust the headlight beam if necessary.
EBU25560

Adjusting a headlight beam

ECB00690
CAUTION:
It is advisable to have a Yamaha dealer make
this adjustment.
8-53