TRENDnet N450 TEW-691GR User Manual page 10

TRENDnet User's Guide
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your modem.
2. Turn off your modem.
3. Disconnect the Network cable from your computer to your modem.
© Copyright 2012 TRENDnet. All Rights Reserved.
4. Using a Network cable, connect the WAN port on the router to your modem.
5. Using another Network cable, connect your computer to one of the four LAN ports on
the router.
6. Plug in the power adapter, connect it to the router's power port, and then push the
On/Off Power Switch to the "On" position (pushed in).
7. Turn on your modem.
8. Verify that the following front panel LED indicators on your router: Power (Solid
Green), Status (Blinking Green), LAN 1, 2, 3, or 4 (Solid/Blinking Green for ports for
which devices are connected), WAN (Solid/Blinking Green), and WLAN (Blinking
Green).
Setup Wizard
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to http://192.168.10.1. Your router will prompt you for a user name and password.
2. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
TEW-691GR
10