GS700TP Smart Switch Software Administration Manual
To configure port-based authentication global properties:
1. Click Security > Port Authentication > Advanced > Port Authentication. The Port
Authentication screen displays
Figure 6-8
The Port Authentication screen contains the following fields:
•
Interface – Displays the interfaces.
•
User Name – Displays the supplicant (client) user name, once the user is authenticated.
•
Port Control – Select the port authorization state.
–
Auto – The port control is Auto and a single client has been authenticated via the port.
–
Authorized – The port control is Forced Authorized, and clients have full port access.
–
Unauthorized – Either the port control is force Unauthorized, or the port control is
Auto but a client has not been authenticated via the port.
•
Guest VLAN – Select whether the Guest VLAN is enabled or disabled on the port. The
default VLAN cannot be defined as a Guest VLAN. The possible field values are:
–
Enable – Enable using a Guest VLAN for the unauthorized port. If a Guest VLAN is
enabled, the unauthorized port automatically joins the VLAN selected in the VLAN
List field.
–
Disable – Disable the Guest VLAN on the port. This is the default value.
Managing Security
v1.0, April 2008
6-13