NETGEAR GS700TP Software Administration Manual page 111

GS700TP Smart Switch Software Administration Manual
• Voice VLAN Aging Time – Enter the Voice VLAN aging time. The Voice VLAN aging
time sets the maximum inactivity time for a Voice VLAN port member after its MAC
address is aged out. If the time since the last MAC address with telephony MAC address
was aged out exceeds the Voice VLAN aging time, the port is dropped from the voice
VLAN. The default time is one day. The field format is Day, Hour, Minute. The aging time
starts after the MAC Address is aged out from the Dynamic MAC Address table. The
default time is 300 sec. For more information on defining MAC address age out time, see
"Dynamic Addresses".
2. Select the device VoiceVLAN Status in the provided field.
3. If you selected Enable in the VoiceVLAN Status field, select the VoiceVLAN ID, Class of
Service, Remark CoS and enter the Voice VLAN Aging Time in the provided fields.
4. Click APPLY to update the device.
Advanced
The Voice VLAN Advanced menu contains the following options:
• "Properties"
• "Port Setting"
• "OUI"
Properties
The Voice VLAN Advanced Properties screen contains information about Voice VLAN on the
device, including the ports enabled and included in the Voice VLAN.
4-24
v1.0, April 2008
Configuring Switching Settings