Q-See Product Warranty - Q-See QT504 User Manual

Parameter QT518
COMPRESSION Compression Standard H.264 Baseline
Format
VIDEO Video In Composite 1.0V
p-p/75Ω,
BNC x 8
Video Out COMPOSITE
1.0V p-p/75Ω,
BNC x 2, VGA
x 1, HDMI,
Loopout x 8
VGA Resolution 1280x1024, 1024x768, 800x600
Record NTSC: 352x240, 704x480
Resolution
PAL: 352x288, 704x576
Display Frame 704x480 at 30FPS
Rate
(per camera)
Record Frame NTSC: D1 30FPS CIF 30FPS
Rate
PAL: D1 25FPS CIF 25FPS
(per camera)
AUDIO Audio Input -8dB~ 22k,
RCA X8
Audio Output -8dB~92dB, RCA X4
ALARM Alarm Input NO or NC 8CH
Alarm Output 4CH
FUNCTION Record Mode Manual/Sensor/Timer/Motion Detection
Multi-Function Simultaneously Record, View Live or Recorded Video,
Playback, Back-up files, Monitor Remotely
INTERFACE Network RJ45 (LAN, Internet)
Interface
Communication RS485, eSATA, Microphone
Interface USB 2.0 x 2 (One for Backup, One
for USB Mouse)
CONTROLS PTZ Control Yes
Remote Control Yes
DISK INFO Disk Type SATA x 2 (up to 2TB) + DVR-RW x1
or SATA x 3
OTHER INFO Voltage 12V5A
Optimal 50°F to 104°F 10°C to 4 0°C
Temperature 10% to 90% Humidity
Average Power <30W (Excluding Hard Drive)
Consumption
64
QT5116 QT536
Composite 1.0V Composite 1.0V
p-p/75Ω, p-p/75Ω,
BNC x 16 BNC x 16
COMPOSITE COMPOSITE
1.0V p-p/75Ω, 1.0V p-p/75Ω,
BNC x 2, VGA x BNC x 2, VGA
1, HDMI, x 1, HDMI,
Loopout x 16
-8dB~ 22k, RCA -8dB~ 22k,
X16 RCA X16
-8dB~92dB,
RCA X1
NO or NC 16CH NO or NC 16CH
4CH 1CH
RS485, eSATA
x 2, Microphone
USB 2.0 x
2 (One for
Backup, One for
USB Mouse)
SATA x 1 (up to
2TB) + DVR-RW
or SATA x 2

Q-SEE PRODUCT WARRANTY

Q-See is proud to back all of our products with a conditional service warranty covering all
hardware for 12 months from the date of purchase. Additionally, our products also come with
a free exchange policy that covers all manufacturing defects for one month from the date of
purchase. Permanent upgrading service is provided for the software.
Liability Exclusions:
Any product malfunction or abnormalities in operation or damage caused by the following
reasons are not within the free service scope of our company:
1. Equipment damage caused by improper operation.
2. Improper equipment operation environment and conditions (e.g., improper power,
extreme environmental temperatures, humidity, lightning and sudden surges of
electricity).
3. Damage caused by acts of nature (e.g., earthquake, fire, etc).
4. Equipment damage caused by the maintenance of personnel not authorized by Q-See.
5. Product sold over 12 months ago.
In order to fulfill the terms of your warranty, you must complete the registration process after
purchasing our product. To do this, simply fill out the User's Information Card on our website
at www.Q-See.com
65