B&B Electronics, Inc.
Connector Pinout
RS-485 Mode
Pin
Signal mark
number
1
GND
2
GND
3
TxRx-
4
TxRx+
5
TxRx-
6
TxRx+
7
+12 V EXT External power supply
8
+12 V EXT External power supply
ATTENTION!
The
the jumpers.
Note: In RS-485 mode, pins 3 and 5 and pins 4 and 6 are internally shorted together.
If galvanic separation is required, the converter must use an external power supply.
Fig. 25: Connection to the router with data cable length less than 10 m
Fig. 24: RS485/422 connector
Description
Signal and supply ground
Signal and supply ground
RS485 B (-)
RS485 A (+)
RS485 B (-)
RS485 A (+)
Table 12: Connector Pinout in RS-485 Mode
power
supply is
selected
on
the
26
SPECTRE User Manual
Data flow direction
Input/Output
Input/Output
Input/Output
Input/Output
module
board
using
SPECTRE_User_Manual_2912m
www.bb-elec.com
www.bb-europe.com