Table of Contents
Advertisement
8-36 System Upgrade
Replacing PCI Board
Follow the procedure below to replace the failed PCI board.
1.
Check the failed board from the event log.
2.
Remove the CPU/IO module referring to the page 8-11.
3.
Remove the PCI bracket, then remove the PCI board.
4.
Replace the board and fasten it.
5.
Install the CPU/IO module referring to the page 8-14.
6.
Connect the network cable and cables for PCI boards.
7.
The installed CPU/IO module will start automatically.
8.
Confirm that the PCI board is correctly recognized by POST and OS.
Advertisement
Table of Contents
Troubleshooting
