Taking Care Of Your Radio - AOR AR-ONE Operating Manual

Main features:
Super wide coverage: 10 KHz ~ 3.3 GHz (continuous)
1,000 memory channels
10 VFOs
Monitor AM, NFM, WFM, USB, LSB, CW, Data
Ultra-stable reference frequency oscillator
Two RS-232C ports plus control head port
Control up to 99 AR-ONE Units with one PC
Triple conversion superheterodyne front end
Antenna input level readout
Adjustable BFO
High intercept
IF signal output (10.7 MHz or 455KHz)
Excellent sensitivity
Detachable control head (optional kit required)

1-2 Taking care of your radio

There are no internal operator adjustments. In the unlikely event of servicing being
required, please contact your dealer for technical assistance.
Do not use or leave the receiver in direct sunlight (especially the LCD). It is best to avoid
locations where excessive heat, humidity, dust and vibration are expected. Always keep
the AR-ONE free from dust and moisture. Use a soft, dry cloth to gently wipe the set
clean, never use abrasive cleaners or organic solvents which may damage certain
parts. Treat the AR-ONE with care, avoid spillage or leakage of liquids into the receiver
and associated power supply. Special care should be taken to avoid liquid entering
around the controls, through the speaker grille or via the connection jacks.
The AR-ONE is designed for operation from a good quality regulated DC supply of 12 to
14 V, which should be capable of supplying 1.5 A. Never connect the AR-ONE
directly to the AC outlet.
The chassis of the receiver is at negative ground. Where provided (depending upon
world market location), the power supply is pre-wired and provides a nominal 12 V DC
output with suitable connectors being fitted as standard for the AC power input and
connection to the AR-ONE.
5