Foxconn A88GMV Series User Manual page 37

"Memory Speed Adjust".
► Memory Speed Adjust
This item will appear only when the "Memory Speed Mode" is set to [Limit] or [Manual].
The available settings are: [800MHz], [1067MHz], [1333MHz], [1600MHz], [Auto].
► Current DRAM Speed
This item displays the current DRAM speed.
► GFX Engine Clock Override
This item allows you to enable/disable GFX Engine Clock Override support.
► PCI Express Clock
This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.
► Spread Spectrum
If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation. But if overclocking is activated,
you had better disable it.
Voltage Options
Memory Voltage Control
Current DRAM Voltage
CPU Voltage Control
Current CPU Voltage
NB Voltage Control
↑↓←→:Move Enter:Select
► Memory Voltage Control
This option is used to change the DRAM voltage in a step of 50mV. The voltage can be incre-
mented from +50mV to +150mV.
► CPU Voltage Control
This option is used to change the CPU voltage in a step of 25mV. The voltage can be incre-
mented from +25mV to +375mV.
► NB Voltage Control
This item is used to adjust North Bridge(NB) voltage. Adjusting the voltage beyond the NB
default voltage could result in damage to NB. The default option is "Disabled".
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
:1.596V
:1.344V
+/-/:Value
Voltage Options
[Disabled]
[Disabled]
[Disabled]
Disabled
+50mV
[Disabled] +100mV
+150mV
F10:Save ESC:Exit
F9:Optimized Defaults
30
Help Item
Options
F1:General Help