Table of Contents
Advertisement
4. Accept or change the suggested Windows port name, and type
any comments in the Description field. Make a note of the
Windows port name as you will need this later. Click OK to
install the Windows port.
5. In the Port menu, click Connect to bring up the Windows
Printers dialog.
6. Select a printer driver from the list of Installed Printers, or click
Add>> to install a new driver. Click Connect...
7. Select the Windows port name defined in step 4 above that
should now feature at the bottom of the Ports list.
8. Click OK to close the Connect dialog, and Close to close
Printers.
The setup is completed and you can now print through your
AXIS 560/660.
Important notes:
Windows 3.1 will require network support such as LAN Server
or LAN Manager Workstation software to be installed in order
to redirect a local printer port to a network device.
AXIS Print Utility for Windows must be running when you
print through your AXIS 560/660. We strongly recommend that
you copy the AXIS Print Utility icon into your StartUp file.
Windows Clients using LANtastic
From any Windows client, the AXIS 560/660 may also be used for
network printing within LANtastic environments. Your choice of
Axis utility software should be guided by type of Windows client
employed. Simply refer to the appropriate Windows Section for your
client, above. Please ensure that your LANtastic client is running the
desired printing protocol.
OS/2
Firstly, ensure that the NetBEUI protocol is active. If necessary, use
MPTS/LAPS (LAN Server) or SETUP (LAN Manager) to activate
it.
Load AXIS Print Utility for OS/2 and Install your AXIS 560/660:
1. Insert the Print Utilities for OS/2 disk into your disk drive, and
open an OS/2 window. Execute the install.exe program
2. With the AXIS Print Utility running, install your AXIS 560/660
by clicking Install
<name>.LP2*, and <name>.CM1*, where <name> is AX
followed by last six digits of the AXIS 560/660 serial number.
For example: AX560B35.LP1. Note that this alphanumeric name
will be superseded by any new name given to your AXIS 560/660
when using AXIS NetPilot™.
*Not supported on the AXIS PrintPoint 1P 560/100 model.
3. Select the ports you want to install, then click Install
Repeat this procedure for each server using the AXIS 560/660.
. The ports appear as <name>.LP1,
.
.
Advertisement
Table of Contents
