Table of Contents
Advertisement
FTP: Select to send the media files to an FTP server when a trigger is activated.
(a)
Server address: Enter the domain or IP address of the FTP server.
(b)
Port: The default FTP server port is 21. It can also be assigned to another
port number.
(c)
User name: Enter the login name of the FTP account.
(d)
Password: Enter the password of the FTP account.
(e)
Remote folder name: Enter the folder where the media file will be placed. If
the folder name does not exit, the IP camera will create one on the FTP
server.
(f)
Passive mode: Most firewalls do not accept new connections initiated from
external requests. If the FTP server supports passive mode, select this
option to enable passive mode FTP and allow data transmission to pass
through the firewall.
(g)
To verify if the FTP setting is correctly configured, click the Test button. The
result will be shown in above this setting page (TEST OK or TEST ERROR).
(h)
Click Submit to activate the setting.
Network storage: Select to send the media files to a network storage location
when a trigger is activated. Please fill in the information for your server.
(a)
Network storage location: Enter the network storage path (\\ server name or
IP address\ folder name).
(b)
Workgroup: Enter the workgroup name for the network storage server.
(c)
User name: Enter the user name for the server.
(d)
Password: Enter the password for the server.
(e)
Primary WINS server:
(f)
To verify if the storage setting is correctly configured, click the Test button.
The result will be shown in above this setting page (TEST OK or TEST
ERROR).
(g)
Click Submit to activate the setting.
64
Hide quick links:
Advertisement
Table of Contents
