Charmglow Drop-In Side Burner Owner's Manual page 15

Quick-Disconnect
Coupler
Side Hole
Side Burner
Hose Fitting
SIDE BURNER
Hose Connection
After dropping in the side burner, run the
side burner hose fitting through the side
hole and pull hose through as far as
possible. Then connect it to the
quick-disconnect coupler
Quick-Disconnect Coupler
Push sleeve back to attach
Sleeve
Battery Installation
Remove burner igniter cap and insert battery with
positive end of battery toward igniter cap. Replace
igniter cap and make sure the igniter is working
properly.
Grease Tray Installation
Insert side burner grease tray into opening on
front side of unit.
.
Side Burner Hose Fitting
14