Parts List And Assembly Instructions - Charmglow Drop-In Side Burner Owner's Manual

ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY
BEFORE ASSEMBLING OR OPERATING YOUR GRILL.
No tools are required to assemble this
Natural Gas Drop-In Side Burner:
PARTS LIST:
1 1 Cooking Grate
2 1 Side Burner Assembly
1 Battery
3
1 Grease Tray
4
FOR MISSING PARTS, PLEASE CALL CUSTOMER
SERVICE AT 800-527-0717.
(Proof of purchase will be required.)
Inspect contents of the box to ensure all parts are
included and undamaged.
Placement Of The Grill
Location
When determining a suitable location take into account concerns such as exposure to wind,
proximity to traffic paths, and keeping gas supply lines as short as possible. Place the grill in well
ventilated areas. Never locate the grill in a building, garage, breezeway, shed or other such
enclosed areas. During heavy use, the grill will produce a lot of smoke. For your comfort, we
recommend a finished height for your grill base of 36 to 38 inches (91.4 to 96.5 cm) and a
minimum of 12 inches (30.5 cm) on either side of your grill.
Clearance
Non-combustible Construction
A minimum of 6 inches (15.3 cm) clearance from the back of the side burner to non-combustible
materials are required for the lid to open fully.
Ventilation
We recommend that adequate ventilation be incorporated into your built in grill base. Vents
should be placed on both sides of your grill base. The upper vent opening should be at least
20 square inches (129 cm
base. The lower vent opening should be at least 10 square inches (64.5 cm
1 inch (2.5 cm) or less from floor level of your grill base.
2
) and located within 5 inches (12.7 cm) of the top edge of your grill
1
2
3
4
2
) and located within
12