Electrolux EN3881AOW User Manual page 21

WARNING!
Make sure that the appliance is
electrically not powered.
To carry out the following opera-
tions, we suggest that this be
done with another person who will
keep a firm hold on the doors of
the appliance during the opera-
tions.
• Remove the upper hinge cover with a
screwdriver (4).
• Open the door and remove the door
end cap cover (1) .
• Remove the top front covers on both
sides. (2,6).
• Unplug the cable connector of the dis-
play (3).
1
2
• Unscrew the hinges and remove the
door (4).
• Unscrew the middle hinge (B). Remove
the plastic spacer (A)
• Remove the spacer ( F ) and move to
the other side of the hinge pivot (E).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C, D) and move to the
other side.
• Fit the pin of the middle hinge ( E ) into
the left-hand hole of the lower door.
3
Remove the cover with the help of a tool
(A) unscrew the lower hinge pivot (B) and
place it on the opposite side. Reinsert the
cover (A) on the opposite side.
Reinsert the lower door on the pivot pin
(B).
Remove the 2 plastic covers and refit it on
the opposite side.
Insert the pivot of the center hinge on the
left hole of the lower door.
Insert the lower door on the pivot of the
lower hinge (B).
ENGLISH
4
5
A
B
E
F
C D
21