Gigabyte GA-X79-UD5 User Manual page 67

B. Updating the BIOS
In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the
BIOS, choose the location where the BIOS ile is saved. The following procedure assumes that you save the
BIOS ile to a USB lash drive.
Step 1:
1. Insert the USB lash drive containing the BIOS ile into the computer. In the main menu of Q-Flash, select
Update BIOS From Drive.
•
The Save Main BIOS to Drive option allows you to save the current BIOS ile.
Q-Flash only supports USB lash drive or hard drives using FAT32/16/12 ile system.
•
If the BIOS update ile is saved to a hard drive in RAID/AHCI mode or a hard drive attached to
•
an independent SATA controller, use the <End> key during the POST to access Q-Flash.
2. Select Flash Disk.
Model Name : X79-UD5
BIOS Version : F1u
BIOS Date
Flash Type/Size : MXIC 25L6465E/6406E
3. Select the BIOS update ile.
Make sure the BIOS update ile matches your motherboard model.
Step 2:
The process of the system reading the BIOS ile from the USB lash drive is displayed on the screen. When
the message "Are you sure to update BIOS?" appears, select Yes to begin the BIOS update. The monitor will
display the update process.
•
Do not turn off or restart the system when the system is reading/updating the BIOS.
Do not remove the USB lash drive or hard drive when the system is updating the BIOS.
•
Step 3:
When the update process is complete, select Reboot to reboot the system.
Q-Flash Utility v1.00
: 10/26/2011
Update BIOS From Drive
Save BIOS to Drive
Select Device
Return to BIOS setup
Flash Disk
Q-Flash
BIOS update is completed.
Power off
Reboot
- 67 -
8MB
Unique Features