Storage Interface
3 x Marvell 88SE9172 chips:
-
4 x SATA 6Gb/s connectors (GSATA3 6~GSATA3 9) supporting up to 4
SATA 6Gb/s devices
-
2 x eSATA 6Gb/s connectors (including 1 eSATA/USB Combo) on the back
panel supporting up to 2 SATA 6Gb/s devices
-
Support for SATA RAID 0 and RAID 1
USB
Chipset:
-
Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, including 1 eSATA/
USB Combo, 6 ports available through the internal USB headers)
2 x Fresco
-
Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through
the internal USB headers)
IEEE 1394
VIA VT6308 chip:
-
Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through
the internal IEEE 1394a header)
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
6 x SATA 6Gb/s connectors
4 x SATA 3Gb/s connectors
1 x CPU fan header
4 x system fan headers
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
3 x USB 2.0/1.1 headers
1 x USB 3.0/2.0 header
1 x IEEE 1394a header
1 x Clear CMOS jumper
1 x Trusted Platform Module (TPM) header
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
1 x CPU overclocking button
1 x BIOS switch button
1 x Clear CMOS button
1 x IEEE 1394 port
7 x USB 2.0/1.1 ports
2 x USB 3.0/2.0 ports
1 x eSATA/USB Combo connector
1 x eSATA
1 x RJ-45 port
1 x optical S/PDIF Out connector
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker
Out, Line In/Mic In, Line Out)
FL1009 chips:
6Gb/s connector
- 11 -
Hardware Installation