Phone Cable Lock; Taps Registration; Wired And Wireless Headsets - Cisco 7941G User Manual

Phone Cable Lock

To adjust the footstand, push in the footstand adjustment button and adjust the tilt.
Phone Cable Lock
You can secure the Cisco Unified IP Phone to a desktop by using a laptop cable lock. The lock connects to
the security slot on the back of the phone, and the cable can be secured to a desktop.
The security slot can accommodate a lock up to 20 mm. Compatible laptop cable locks include the Kensington
laptop cable lock and laptop cable locks from other manufacturers that can fit into the security slot on the
back of the phone. See the following figure.
Figure 1: Connecting a Cable Lock to the Cisco Unified IP Phone

TAPS Registration

TAPS might be used either for a new phone or to replace an existing phone. To register with TAPS, pick up
the handset, enter the TAPS extension provided by your system administrator, and follow the voice prompts.
You might need to enter your entire extension, including the area code. After your phone displays a confirmation
message, hang up. The phone restarts.

Wired and Wireless Headsets

You can use a wired headset with your Cisco Unified IP Phone. If you use a Cisco Unified IP Phone 7962G
or 7942G, you can use a wireless headset in conjunction with the Wireless Headset Remote Hookswitch
Control feature.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
16
Phone Installation
®