Footstand Adjustment; Phone Cable Lock - Cisco 7941G Administration Manual

Cisco Unified IP Phones Installation
Related Topics
Softkey Templates
Set Up Additional Buttons
To configure the 48 additional buttons, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Button Template.
Step 2 Select the Add New button.
Step 3 From the drop-down list, choose a template and click Copy.
Step 4 Rename the new template.
Step 5
Update the table to 54 Directory Numbers for Cisco Unified IP Phone 7962G.
See Cisco Unified Communications Manager Administration Guide and Cisco Unified Communications
Manager System Guide for more information on creating and modifying templates.
Note

Footstand Adjustment

The Cisco Unified IP Phone includes an adjustable footstand. When you place the phone on a desktop surface,
you can adjust the tilt height to several different angles in 7.5 degree increments from flat to 60 degrees. You
can also mount these phones to the wall by using the footstand or by using the optional locking wall mount
kit.
To adjust the footstand, push in the footstand adjustment button and adjust the tilt.

Phone Cable Lock

You can secure the Cisco Unified IP Phone to a desktop by using a laptop cable lock. The lock connects to
the security slot on the back of the phone, and the cable can be secured to a desktop.
You can also attach two Cisco Unified IP Phone Expansion Modules 7915s or two Cisco Unified IP
Phone Expansion Modules 7916s, to provide 48 additional lines or speed-dial and feature buttons.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Footstand Adjustment
Communications Manager 9.0 (SCCP and SIP)
11