Phone Screen Cleaning; Feature Buttons And Menus - Cisco 7941G User Manual

Phone Screen Cleaning

The Messages, Directories, and Services screens on your phone may appear in Normal mode or in Wide
Note
mode depending on how your phone has been set up. A phone window in Wide mode spans the entire
width of the phone screen. However, neither you nor your administrator can adjust the phone screen
viewing mode.
Phone Screen Cleaning
Use only a soft, dry cloth to clean phone screen. Do not use any liquids or powders on the phone, because
they can contaminate phone components and cause failures.
When the phone is in power save mode, the touchscreen is blank and the Display button is not lit. When the
phone is in this condition, you can clean the screen, as long as you know that the phone remains asleep until
you finish cleaning. If the phone is likely to wake up during cleaning, wait until it is awake before following
the preceding cleaning instructions.
Related Topics
Energy Savings, on page 11

Feature Buttons and Menus

Press a feature button to open or close a feature menu.
If you want to...
Open or close a feature menu
Scroll through a list or menu
Go back one level in a feature
menu
Switch between open feature
menus
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
8
Then...
Press a feature button:
Messages
Services
Directories
Settings
Help
Press the Navigation button.
Press Exit. Pressing Exit from the top level of a menu, closes the menu.
Press a feature tab. Each feature menu has a corresponding tab. The tab
is visible when the feature menu is open.
Phone Features