Table of Contents
Advertisement
Use the supplied/optional accessories
Installation and removal of the monitor hood
Installation
Fit the monitor hood as shown in the figure into the rails above and below the monitor window one after
and other.
Then, insert the upper of the monitor hood into the convex part.
Removal
Remove the monitor hood from the rails above and below the monitor window one after the other by
widening the monitor hood.
Then, remove the upper of the monitor hood.
Mounting and removal of the body cap
Mounting
Fit the convex part in the left and right sides of the body cap into the concave part of the port ring.
Then, turn the port ring (1) to lock.
Removal
Turn the port ring (3) while sliding the slide lock of the port ring (2).
Then, remove the body cap.
Rails
3
2
1
EN
EN 8
Advertisement
Table of Contents
