Placement Of Transmitter; Activating The Headphones; Muting The Television Sound - ClearSounds CS2000M Owner's Manual

PLACeMeNT OF THe
TRANsMITTeR
8
Turn on the Infrared Transmitter
(A). The infrared light rays are
emitted in a conical shape. For best
results, place your Transmitter above
your television or any other audio source.
The Transmitter will work best if it is
within 33 feet (apx. 10 meters) from the
headphone receiver (B). There should
not be anything obstructing the trans-
mission of the infrared light rays to the
receiver. See Diagram 8.
Diagram 8
ACTIvATING THe
HeADPHONes
Place two AAA batteries into the battery
compartment in the left earpiece of the
headphone matching positive to posi-
tive and negative to negative. Turn on
the headphones making sure there is an
unobstructed line of sight between the
headphones and the Transmitter. Adjust
the television volume and the headphone
volume to a comfortable listening level
MUTING THe
TeLevIsION sOUND
Many televisions have speaker switches
located on the back panel. If your tele-
vision has one and you want to keep
the sound muted, move this switch to
the OFF position and listen to your TV
exclusively through the headphones.
Some televisions have speaker switches
that can only be controlled by the remote
control. If your television falls into this
category, press Menu on the TV remote
and locate SPEAKER on the screen
menu. Switch SPEAKER to the OFF
position and listen to the TV exclusively
through the headphones. To find out if
your television has this function, refer to
your owner's manual.