Table of Contents
Advertisement
Finalizing the Installation
2 6
Log Installation
!
Make sure the gas control valve is "OFF" and the heater is cool prior to conducting service.
!
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage or personal injury.
NOTE: The burner must be correctly positioned. Grasp the burner, lift it up,
position the gas inlet tube over the burner tube, and slide the
burner all the way down (see page 38 for details).
Travis Industries
1 0 0 - 0 1 1 8 7 _ 0 0 0
(for qualified installers only)
These steel platforms with
pins are for the rear log.
The pins are used to locate
the logs on the burner.
These flat spots are for the
front twigs.
Place the rear log in place as
shown here.
Place the front logs in place.
Note how the holes in the
bottom of the front logs fit
over the pins on the burner.
4 0 7 0 2 1 9
Hide quick links:
Advertisement
Table of Contents
