Advertisement
Available languages
Available languages
Grill Halogen Light
LIGHT OPERATION INSTRUCTIONS
1. Make sure light switch on the control panel is in the "OFF" position.
2. Connect light plug to an extension cord, then plug the extension
cord into the outlet on the wall.
3. Turn the light switch to "ON".
WARNING
˙
Keep any electrical supply cord away from any
heated surface.
˙
Use the shortest length extension cord required.
Do not connect 2 or more extension cords together.
Bulb Replacement
▲
Make sure light switch on the control panel is in the "OFF" position and adapter plug is disconnected from outlet.
Step 1
Remove the screw securing the light
socket.
Step 4
Pull out the bulb and replace
with a new bulb.
Step 2
Take out the socket and remove the lens.
Step 5
Reverse instructions from step 3
through step 1 to re-install socket.
CAUTION
Take care not to touch the bulb with your bare fingers.
Touching bulb with your skin can leave a film on the
bulb that causes it to burn out quickly.
2.
1.
ON
OFF
Light plug
Step 3
Loosen the two screws which lock
the bulb in place.
Bulb Specification
Bulb Type: Halogen
Wattage: 10 W per bulb
Voltage: 12 V
3.
ON
OFF
Extension cord,
for outdoor use
Continued on next page
464224212 • 15
Advertisement
