Teleco UST DK User Manual page 100

Memos ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
To program Speed Dial names and numbers
1. Press
2. Dial a station speed
dial code.
3. Press
4. Enter the name or
memo (12 characters
maximum).
5. Press
6. Enter a phone number
(16 characters
maximum).
7. Press
record data in
memory.
To display the Speed Dial number and memo
Press
To dial a Speed Dial number
1. When your phone is
idle, press
2. Enter Station Speed
Dial Code
...or System Speed
Dial Code.
100
, then
.
See Table 15 for speed dial codes.
. If a name was previously stored on
this code, it appears on the top line.
The name appears on the bottom line as you enter it. (See
"Entering LCD Characters" on Page 91.)
.
The number displays on the top line as you enter it.
to
+ , where X~X is the speed dial number to be displayed.
+ .
# * 10 SPEED DIAL
*10 NAME
SPEED DIAL
SPEED DIAL NO. 10
UST DK Digital Telephone