Connecting Cables To The Monitor - Fujitsu Siemens Computers SCENICVIEW P20W-3 Operating Manual

Connecting cables to the monitor

The monitor ports are protected by a cover.
► Remove the cover.
The data cables supplied have two 15-pin D-SUB connectors / two 24-pin DVI connectors for
connection to the monitor and to the computer.
► Select the suitable data cable for your computer.
Information on the computer connections and interfaces is contained in the operating manual
for your computer.
► Connect one of the connectors of the data cable to the D-SUB socket (5) or the DVI-D socket
(4) or to the HDMI socket (3) on the monitor and secure the plug connection by tightening the
retaining screws.
The monitor automatically detects the input when only one signal source is connected.
i
► Insert one connector of the audio line in the AUDIO IN (7) socket on the monitor and make sure
it is properly engaged.
► Plug the power cable supplied into the power socket (2) of the monitor.
► Mount the cover over the connections.
A Kensington lock can be mounted in the security slot (6) to prevent the monitor from
i
being stolen. A Kensington lock is not included on delivery of the monitor.
A26361-K1175-Z120-1-7619, edition 1
SCENICVIEW P20W-3/P22W-3
1 = Main switch
2 = Power socket
3 = HDMI socket
4 = DVI-D socket (DIGITAL)
5 = D-SUB socket (VGA)
6 = AUDIO-IN socket
7 = Security slot for "Kensington Lock"
8 = Space for the cover
9 = Holes for fixing swivel arm or wall bracket
11