Table of Contents
Advertisement
Switching the monitor on/off
The main switch at the rear and the ON/OFF switch at the front are used for switching the monitor on
and off.
►
To start, switch the monitor on with the main switch (4) at the rear.
Press the buttons from the bottom up.
i
The power indicator (3) lights up blue when the monitor and computer are switched on. The power
indicator lights up orange if the monitor is not receiving a video signal or if it is in energy saving
mode. The power indicator goes out when the monitor is switched off.
When you switch the computer system on, you must proceed in the following order:
►
Switch the LCD monitor on with the ON/OFF switch (2).
►
Then switch on the computer.
If your computer has a power management function (energy-saving mode), you should
i
read the "Notes on power management" section in this chapter.
A26361-K1175-Z120-1-7619, edition 1
SCENICVIEW P20W-3/P22W-3
1 =
Buttons for the OSD menu
(On-Screen-display)
2 =
Power indicator
3 =
ON/OFF switch
4 =
Main switch
13
Hide quick links:
Advertisement
Table of Contents
